To Next PageTo Next Page
Need help?Do you have a question about the Techne TE-10D and is the answer not in the manual?
General| Brand | Techne |
|---|---|
| Model | TE-10D |
| Category | Controller |
| Language | English |
Specifies environmental and operational conditions for the thermoregulator.
Instructions to check all parts are present and correct after unpacking.
Lists and describes the main parts that constitute the thermoregulator.
Provides crucial safety precautions for operating the thermoregulator.
Emphasizes trained personnel and adherence to instructions for safe operation.
Details electrical safety, earthing, and connecting the mains cable.
Explains the meaning of symbols associated with the power switch.
States that only qualified personnel should dismantle the unit; no user-serviceable parts.
Provides instructions on how to clean the unit safely and effectively.
Guides on checking, resetting the cut-out, and fuse protection/replacement.
Explains internal and external circulation modes for specific thermoregulator models.
Covers leveling the bath and securely mounting the thermoregulator unit.
Details using screws and fasteners to secure the bridge piece and thermoregulator.
Instructions on using a clamp or bridge piece with screws to secure the unit.
Describes how to fit an optional cooling coil to the thermoregulator.
Mentions dip and flow coolers for lower temperatures and their compatibility.
Guides on thermometer installation, bath filling, recommended liquids, and bath covers.
Explains the meanings of indicator lamps on the thermoregulator's front panel.
Steps for powering on the thermoregulator and initial display indications.
Describes how to use the SET button to display and adjust the set temperature.
Explains how to increase or decrease the set temperature using arrow buttons.
Describes 'LLL' and 'HELP' indicators and their implications.
Provides instructions for safe shutdown and handling after operation.
Lists the nominal dimensions for various unheated Techne bath models.
Lists available unheated baths and their corresponding flat or gabled lids.
Lists adjustable trays and polypropylene spheres for bath applications.
Describes the high-temperature cooling coil accessory for rapid cooling.
Lists liquid calibration baths, dip coolers, and flow coolers with specifications.
Lists refrigerated baths and the TechneWorks PC software for data logging.
