Technibel MPAFIA0R5IAA - 7-3 System Does Not Run

7-3 SYSTEM DOES NOT RUN.
Is the set point
temperature
appropriate
Reduce the set point
temperature in
cooling mode or
increase the set point
in heating mode
YES
Is the unit in protection
mode?(see par. 5-9 e 5-10)
Wait some minutes to
restore normal condition
YES
NO
CASE 1
CASE 2
There is a fault
signaling
Check outdoor unit leds
signaling (see par.5.17)
Normal leds
configuration
2 - IN INDOOR UNIT THERE IS ONE LED ON AT LEAST
AND THE UNIT RECEIVES THE REMOTE CONTROL SIGNAL
NO
see section 6.4
see section 6.6
23