EasyManua.ls Logo

Technibel PMHRV Series - Page 6

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
3.7 - VENTILATION WITH AVAILABLE PRESSURE
(for a unit installed in a room)
Code K 60 Q 002 M for PMHRV 2044 and 2050
Code K 60 Q 005 M for PMHRV 2064 and 2072
3.6 - AUXILLIARY ELECTRIC HEATING
The heater consists of immersion heaters each rated at 16 kW (400 V, 3-phase), secured to the hydraulic module's
buffer tank.
These immersion heaters are controlled from a specific unit with 2-stage control, and the power feeders are protected by
circuit breakers and a master switch (power supply separated).
Backup is authorized with the 2
nd
stage, although is triggered only if the generator is out of service.
The power supply for this heating system is connected separately (3-phase 400 V).
Each heating assembly is equipped with a safety thermostat with 2 thresholds (1 automatic reset threshold and 1 manual reset
threshold).
PMHRV 2044 to 2072
Back-up - 16 kW
2
nd
stage - 16 kW
1
st
stage - 16 kW
Water
outlet
Tank
Water inlet
Immersion heater with security
Heating power: 48 kW
Current : 70 A
Code K 60 C 480 M : Standard

Related product manuals