13TouchScreen TCA 400 Getting Started Guide – Installation
To disarm the system from Touchscreen:
Emergency alarms and smoke alarms are reported without an Alarm IMPORTANT NOTE:
Transmission delay or an Entry Delay. Consult Customer Care to understand the number of
seconds congured for the Alarm Transmission Delay on your system.
Tap the Security Status shield when it is an
Armed State.
1
2
Enter your Keypad Code.
*
If an alarm was triggered prior to entering
your Keypad Code, an alarm Summary
Report will be displayed after disarming
your Security System.
To Next Page
Loading...
Need help?
General