Technicolor TG582n Quick Setup Guide

17
TG582n Quick Set Up Guide
3. Click on the name of your wifi network which should be written
in Blue.
4. Click on Configure in the top right hand corner of the page.
5. Change Channel Selection from Automatic to Manual.
6. Select another channel to the one shown in Channel. First try
channels 1, 6 or 11.
7. Click Apply to confirm the change. Then wait 60 - 120 seconds
for your computer to automatically pick up the new settings and
reconnect to your wifi network. IF there is no improvement, try the
remaining channels 2-5 or 7-10 periodically until best performance
is achieved.

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+