EasyManuals Logo
Home>Technics>Wireless Headphones>EAH-A800

Technics EAH-A800 Operating Instructions

Technics EAH-A800
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Operation
18
A maximum of two Bluetooth
®
devices can be connected at the same time.
The default setting is “OFF”.
When the “Technics Audio Connect” app is used, you can set to “ON”.
For information about the connection and registration of Bluetooth
®
devices and the unit (l 11,
“Connecting a Bluetooth
®
device”)
1 Pair this unit with each of the Bluetooth
®
devices.
2 Connect the first Bluetooth
®
device and the unit.
3 Connect the second Bluetooth
®
device and the unit.
Note
For more details, including more specific setup instructions, refer to the operating instructions for the Bluetooth
®
devices.
This may not work with some apps and software.
LDAC cannot be played back when this function is ON.
When the unit is turned off, an English guidance message will be heard indicating the battery level.
When the battery level starts to run low, the blinking LED indicator will turn from blue to red, and as it drops further,
you will be notified by one beep every 1 minute.* When the battery runs out, a tone and a guidance message will be
heard and the power will turn off.
* If you press [Í/I] twice quickly, an English guidance message will be heard and you can check the battery level.
Creating multi-point connections
Battery level notification

Other manuals for Technics EAH-A800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technics EAH-A800 and is the answer not in the manual?

Technics EAH-A800 Specifications

General IconGeneral
Cable length1 m
Control typeButtons
Product typeHeadphones
Product colorSilver
Wearing styleHead-band
Volume controlDigital
Recommended usageCalls/Music
Works with Amazon AlexaYes
USB connectorUSB Type-C
Wireless range10 m
Bluetooth version5.2
Bluetooth profilesA2DP, AAC, AVRCP, HFP, HSP, LDAC, SBC
Connectivity technologyWired & Wireless
Microphone typeBuilt-in
Number of microphones8
Battery typeBuilt-in battery
Charging sourceUSB
Fast charging time15 min
Battery recharge time3 h
Continuous audio playback time (with ANC)50 h
Continuous audio playback time (without ANC)60 h
Quantity1
Cables includedUSB Type-A to USB Type-C
Battery life3600 min
Weight and Dimensions IconWeight and Dimensions
Depth85 mm
Width170 mm
Height196 mm
Weight298 g

Related product manuals