Other
22
Restoring to the factory settings
When you want to delete all pairing device information, etc. in this unit, you can restore this unit to the factory
settings (original settings upon purchase).
1
While the power is turned off, press and hold [Í/l] for at least 7 seconds until the LED
indicator lights alternately in blue and red.
2
Release your finger from [Í/l].
3
Press and hold [Í/l] and [i] for at least 5 seconds.
• The default settings will be restored after the LED indicator (blue) blinks fast and the unit turns off.
∫ Attention
• When pairing a device again, delete the registering information (Device: “EAH-A800”) from the Bluetooth
®
device’s
menu, and register this unit with the Bluetooth
®
device again. (l 13)
• Some setting values, such as the language settings for voice prompts and Amazon Alexa, are kept.
To Next Page
Loading...
Need help?
General
