Technics EAH-AZ60 - Turning Earphones On and Off; Powering Earphones On and Off

Preparation
17
Turning the earphones on and off
∫ To turn the earphones on
Take the earphones out of the charging cradle.
• The earphones turn on. A beep will sound and the earphone LEDs blink
(blue)* slowly.
* The batteries are low when they are blinking in red.
∫ To turn the earphones off
Put the earphones into the charging cradle.
• When the earphones are inserted, the charging cradle LED (cyan) flashes
twice. If it is not flashing, the earphones are not inserted correctly.
Note
• If something with a magnet in it is brought close to the earphones while they are being used, the earphones may turn
off. Move the item with the magnet in it away if this occurs.
eah_az60_az40_pnqp1675za_full_eng_s.book 17 ページ ２０２１年９月２８日 火曜日 午前１０時７分