Technics QUARTZ SL-7 - Page 4

We want to thank you for selecting the SL-7.
For optimum performance, we recommend that -
you read these instructions carefully.
Caution for safe use
of this apparatus
(For UNITED KINGDOM)
Caution
@ This apparatus is double insulated, safety earth not required.
Important
¢ The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows.
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be con-
nected to the terminal which is marked with the letter L or
coloured RED.
This equipment should be disconnected from the mains
when not in use.
Caution:
Make sure that the turntable's AC line-voltage selector is
matched to your local voltage before connecting the AC
power plug.
Never connect to a DC socket.
lf the pre-selected voltage is different from your local
voltage, turn the AC line-voltage selector with a screw-
driver so that it corresponds to your local voltage.
The AC line-voltage selector is located at the bottom of
the base.
SELECT
LINE VOLTAGE
110~120V
220~240V