Technics SA-AX920 - Listening to Radio Broadcasts; Sequential Tuning; Automatic Station Search; FM Stereo Noise Reduction

II
Use the tuning buttons to tune-in radio stations.
IBm Turn INPUT SELECTOR to select TUNER.
I_ Press BAND to select "FM" or "AM".
I[_ Press TUNING (V) or (^) to tune to the
desired frequency.
Tuning intervals FM: 0.2 MHz
AM: 10 kHz
=QUARTZ LOCK" lights up when tun_l_ .......
=STEREO" lights up when an FM stereo broadcast is
received.
To make an automatic search for stations
If TUNING (V) or (^) is held down for an instant until the fre-
quency begins to scroll, the broadcast stations are tuned in
automatically when one is found.
Tuning may stop automatically if any jamming is encountered.
• ..°o°......,°°o....,°+..o i.o.°.eo.o.+..oo.o,.....°,,oo°°°...o ,,o,°°°°.o°..°°....
If noise is excessive in the FM stereo mode
Press FM MODE.
(The "STEREO" indicator will go out, and the "MONO" indicator will
light up.)
The broadcast will be monaural, but noise will be reduced.
If the button is pressed once more, the stereo mode will be
resumed.