Oo o 0
G
O0
0
r_nn_
C3 C3 F--I E3
rm rm C3 C3
TUNER/BAND
%
TUNER/
BAND
%
!-
Selectedband
I
m .... ;'°"°°'"°'"°""°'°"°'°'°°'''"°'°'°'°°'°'°°°°'"°°'°'"°°°'°°°°'l
DIRECT / DISC I_1 _
TUNING / ENTER
_L_ ,--.__,_......_.;-'_.
(approx.10 seconds)
.........................................................................I
._."IF,'___.:t',P.[,,]
®®® " " q::)oq:)
®®_®
®®® 0 c;:)@ o
® CO000
•.s-_:.4
(Only available from the remote control.)
Specify the frequency using the numeric buttons on the remote
control transmitter to directly tune to the desired station.
II Press TUNER/BAND.
This will set the remote control to operate the tuner.
The selector on the receiver will change to TUNER.
Each time the button is pressed, the band will change,
FM _ AM
_'J Press DIRECT TUNING/DISC ENTER.
Press the appl
enter the freqt "_
t
flashing, r.O_
Tuning intervals FM: 0.1 MHz
AM: 10 kHz
If the desi, ed F! _fr
[]-. []--, I_-. @
I_1
P.i Press the appropriate numeric buttons to
enter the frequency, while cursor display is
Ifthe desiredFM frequencyis107.9 MHz,press
If the frequency has been input correctly, the displayed
frequencywillblinkonce.
1. If nobutton is pressed whilethe cursordisplayis flashing,
the displaywill returnto the frequency whichis currently
being received. TO re-specifythe frequency, repeat the
procedurefrom step2.
2. Ifthe frequencyhas notbeen inputcorrectly,"ERROR" will
be displayed.Inthiscase,re-enterthe frequency.
To Next Page
Loading...
