Technics SA-GX370 User Manual

26
If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function
displays characters which can be useful for indicating the
method by which this condition can be remedied.
lf “ERROR” or scrolling characters (for instance, “TAPE
MONITOR ON NOW”) appears on the display during operation,
carry out the following operation.
- HELP
~RESET
a a Aa SS SC
So SSS sees
Ol
<7 ra
HELP Press -HELP momentarily.
The method for remedying this condition will
be displayed.
For your reference:
If the above button is pressed for a longer period until “RESET”
appears on the display, the operation settings for the unit will be
initialized to the settings made at the time of shipment.
However, any broadcasting stations which have been preset into
memory will not be erased at this time.
@ AMPLIFIER SECTION
Power output (at 240 V)
DIN 1 kHz (T.H.D. 1%)
(For United Kingdom and Europe)
{[SA-GX670] 2 x 100 W (4 Q)
[SA-GX470] 2 x 80 W (4.9)
{SA-GX370] 2 x 50 W (4 Q)
[SA-GX670] 2« 110 W (8 Q)
[SA-GX470] 2x 100 W (8 Q)
20 Hz—20 kHz continuous power output
both channels driven
(For United Kingdom and Europe)
[SA-GX670] 2 x 65 W (8 Q)
[SA-GX470] 2x 50 W (8. Q)
[SA-GX370] 2 x 30 W (8 Q)
[SA-GX670] 2x 90 W (8 Q)
[SA-GX470] 2 x 80 W (8 Q)
(For others)
(For others)
Total harmonic distortion
rated power at 20 Hz—20 kHz
half power at 1 kHz
Power output at the Dolby Pro Logic operation
DIN 1 kHz (T.H.D. 1%)
Front (For United Kingdom and Europe)
[SA-GX670] 2 x 60 W (4 Q)
[SA-GX470] 2 x 50 W (4 Q)
[SA-GX370] 2 x 40 W (4.Q)
[SA-GX670] 2 x 60 W (8 Q)
[SA-GX470] 2 x 40 W (8 Q)
Center (For United Kingdom and Europe)
[SA-GX670] 60 W (4 Q)
[SA-GX470] 50 W (4 Q)
[SA-GX370] 40 W (4 Q)
[SA-GX670] 60 W (8 Q)
[SA-GX470] 40 W (8 Q)
Rear (For United Kingdom and Europe)
[SA-GX670] 30 W (4 Q)
[SA-GX470] 25 W (4 Q)
[SA-GX370] 20 W (4 Q)
[SA-GX670] 60 W (8 Q)
[SA-GX470] 20 W (8 Q)
0.05% (8 Q)
0.03% (8 Q)
(For others)
(For others)
(For others)
intermodulation distortion
rated power at 60 Hz: 7 kHz= 4:1, SMPTE
Power bandwidth
both channels driven, —3 dB
0.5% (8 Q)
10 Hz—40 kHz (8 2)
Damping factor 40 (8 Q)
Input sensitivity and impedance
PHONO 3 mV/47 kQ
CD, VCR 1, VCR 2, TAPE/DCC 200 mV/22 kQ
S/N at rated power (8 ©)
PHONO
CD, VCR 1, VCR 2, TAPE/DCC
Frequency response
PHONO
70 dB (IHF, A: 80 dB)
75 dB (IHF, A: 88 dB)
RIAA standard curve
(30 Hz—15 kHz) +0.8 dB
CD, VCR 1, VCR 2, TAPE/DCC 10 Hz-40 kHz, +3 dB
Tone controls .
BASS 50 Hz, +10 to —10 dB
TREBLE 20 kHz, +10 to -10 dB
Loudness control (volume at —30 dB) [SA-GX670 only]
50 Hz, +9 dB
Output voltage
VCR 1 OUT, TAPE/DCC REC (OUT) 200 mV
Channel balance (250 Hz—6.3 kHz) +1 dB
Channel separation 55 dB
Headphones output level and impedance 430 mV/330 Q
Load impedance
A or B (For United Kingdom and Europe) 4-16
(For others) 8-160
A and B 8-16

Technics SA-GX370 Specifications

General

Brand	Technics
Model	SA-GX370
Category	Stereo Receiver
Language	English