EasyManua.ls Logo

Technics SA-GX350

Technics SA-GX350
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Other manuals for Technics SA-GX350

Question and Answer IconNeed help?

Do you have a question about the Technics SA-GX350 and is the answer not in the manual?

Technics SA-GX350 Specifications

General IconGeneral
Power Output60 watts per channel into 8Ω (stereo)
Total Harmonic Distortion0.05%
Frequency Response10Hz to 40kHz
Input Sensitivity3mV (MM), 200mV (line)
Signal-to-Noise Ratio80dB (MM), 85dB (line)
Dimensions430 x 136 x 355mm
Weight8.2kg
Tuning rangeFM, MW
Speaker load impedance4 - 16 ohms

Summary

SPECIFICATIONS (DIN 45 500)

AMPLIFIER SECTION SPECIFICATIONS

Detailed specifications for the amplifier stage, including power output and distortion.

AM TUNER SECTION SPECIFICATIONS

REMOTE CONTROL TRANSMITTER DETAILS

FRONT PANEL CONTROLS AND DISPLAYS

AC MAINS LEAD SAFETY PRECAUTIONS

Important safety precautions regarding the AC power cord and plug.

FUSE REPLACEMENT PROCEDURE

Step-by-step instructions for safely replacing the fuse in the unit.

EQUIPMENT CONNECTIONS

CONNECTING AUDIO AND VIDEO EQUIPMENT

Guide for connecting various external audio and video devices to the receiver.

ANTENNA CONNECTIONS

FM OUTDOOR ANTENNA SETUP

Guidelines for connecting external FM outdoor antennas for improved reception.

AM ANTENNA SETUP

AM LOOP ANTENNA CONNECTION AND MOUNTING

Instructions for connecting and mounting the AM loop antenna for better AM reception.

SPEAKER CONNECTIONS

SPEAKER PLACEMENT GUIDELINES

Recommendations for optimal speaker positioning to enhance Dolby Pro-Logic sound effects.

SPEAKER CONNECTION DETAILS

FRONT SPEAKER CONNECTION

Detailed instructions for connecting the left and right front speakers.

REAR SPEAKER CONNECTION

Detailed instructions for connecting the left and right rear speakers.

CENTER SPEAKER CONNECTION

Detailed instructions for connecting the center speaker.

METHOD FOR USE

REMOTE CONTROL OPERATION

REMOTE CONTROL PREPARATIONS

Steps to ensure the remote control is ready for use with the receiver and other devices.

REMOTE CONTROL TROUBLESHOOTING

Procedures to follow if the remote control fails to operate the unit.

OPERATING THE RECEIVER

BASIC RECEIVER OPERATIONS

Covers turning the unit on/off, selecting sources, and adjusting volume.

PLAYING AUDIO MEDIA

WATCHING VIDEO CONTENT

DISASSEMBLY INSTRUCTIONS

REAR PANEL AND INTERNAL PCB REMOVAL

MAIN PCB AND POWER COMPONENT REMOVAL

POWER IC AND REGULATOR IC REPLACEMENT

MAIN P.C.B. CHECK AND TROUBLESHOOTING

BLOCK DIAGRAM

PROTECTION CIRCUITRY AND REPAIR PREPARATION

SCHEMATIC DIAGRAM

PRINTED CIRCUIT BOARD LAYOUTS

WIRING CONNECTION DIAGRAM

REPLACEMENT PARTS LIST

RESISTORS AND CAPACITORS LIST

RESISTORS AND CAPACITORS LIST (CONTINUED)

Related product manuals