Need help?Do you have a question about the Technics SA-GX910 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.05% |
|---|---|
| Tuning range | FM, MW |
| Channel separation | 50 dB |
| Speaker load impedance | 4 - 16 ohms |
| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
| Dimensions | 430 x 150 x 350 mm |
| Output | 4 - 16 ohms |
| Video Connections | composite |
| Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz) |
| Frequency Response | 5 Hz - 100 kHz (+0 dB, -3 dB) |
Important safety information and warnings to be read before operating the unit.
Essential safety instructions regarding power source, installation, and usage.
Guidelines for unit placement considering ventilation, heat, and moisture.
Instructions on proper placement, avoiding magnetism, and stacking.
Procedures for cleaning the unit's cabinet, panel, and controls.
Information on when to seek professional service and user limitations.
List of items included with the receiver for setup and operation.
Detailed overview of all input, output, and connection terminals on the rear panel.
Instructions for connecting indoor and outdoor FM antennas for optimal reception.
Guides for connecting AM loop and outdoor antennas to the receiver.
Details on connecting speakers to terminals and setting speaker impedance.
Description of controls related to amplification, EQ, and sound modes.
Explanation of controls for tuning, band selection, and FM modes.
Explanation of various indicators on the receiver's display panel.
Overview of the remote control transmitter's buttons and functions.
Steps for powering on, selecting speakers, and choosing audio/video sources.
Guides for listening via headphones, using S-video, and after-use procedures.
How to manually tune stations and reduce noise in FM reception.
Covers manual, automatic, backup memory settings, and tuner operations.
Details on adjusting parametric EQ, storing curves, and using factory presets.
Instructions for adjusting the bass and treble controls for sound balance.
Guides for channel balance, delay, and input balance adjustments.
Instructions for using HALL, CLUB, STADIUM modes and adjusting rear volume/delay.
Details on adjusting channel balance and enjoying Dolby 3 stereo sound.
Using loudness for low-frequency emphasis and adjusting left/right balance.
Instructions for recording audio to tape decks and monitoring playback.
Guides for recording video from VCRs, including edit recording.
Guides for playing and recording digital audio tapes (DAT).
Guides for battery installation, usage, and general operation notes.
Controls for power, volume, and operations for radio, CD, tape, and digital audio.
Controls for watching TV, video tapes, and discs, including playback and effects.
Instructions for recording TV broadcasts, video discs, and program play.
Controlling other units, direct play, multi-function programming, and code management.
Guidance on seeking professional service and obtaining product information.
To Next Page
