Technics SA-GX910 User Manual

—=_—
-
Remote-Control
Operation
(Video)
Have you connected the VCR and TV as indicated
on pages 5-77?
p
This remote-control transmitter can control any Panasonic televi- lf there are two or more VCRs made by the same company, the
sion of vcR which is equipped with remote-control functions that VCRs will operate at the same time when the remote control is
have been introduced since 1984, operated, so remove the tape from the VCR that is not being used.
When operating the TV and VCR, face the remote-control transmit- For detailed information concerning TV or VCR operation, please
ter toward the remote-control signal receptor of each unit. tead the operating instructions for each unit carefully.
Watching TV broadcasts
® wy
SELECTOR ENTER
6200000 /b ge
©9@O® ©
SS
1 Press the “Tv” inputifunction select key. 5 Facing toward the VCR:
Press the power key.
(Power for VCR will be switched ON.)
2 Facing toward the TV:
Press the power key.
(Power for TV will be switched ON.) 6 Facing toward the VCR:
Select the desired channel.
3 Facing toward the TV: @ When using the preset channel keys.
Set the TV/VIDEO mode on the TV to “VIDEO”. Press two keys consecutively to tune to the
@® Select the “TV/VIDEO” mode by the left key. desired TV broadcast directly.
@ Press the right key.
b When using the channel up/down keys.
: Press “W CH” or “CH A” to select the
4 Press the “VCR 1” (or “VCR 2”) key. desired channel.
—53—

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English