Technics SA-GX910 - Edit-Recording

‘Edit-Recording
Have you completed the steps (on page 18) of
“Basic Operating Procedure” ?
Edit recording from VCR 1 to
Before recording, prepare the VCR (VCR 1 or VCR 2) for recording
(recording level adjustment, etc.).
1 To record from the VCR 1 to the VCR 2:
Press the “VCR 1” button.
(The “[]
will be displayed on the VCR display.)
!
If
beds |
VOR display
1 b To record from the VCR 2 to the VCR 1:
Press the “VCR 2” button.
(The “[2}” will be displayed on the VCR display.)
veo oo
| VLR Cc.
—40—
2 Begin recording
and play back
the tape.
VCR 2 and vice versa —
2 Begin recording on the VCR (VCR 1 or VCR 2)
and play back the tape on the playback VCR
(VCR 1 or VCR 2).
Follow your VCR's operating instructions.