Technics SA-GX910 User Manual

&
Adjustment of each channel balance
1 Turn on the Dolby 3 stereo system. 3 Adjust the volume balance.
While standing in the listening area, adjust the output level of
2 Press the test signal transmission button. each epeaker-until they.are:all identical.
V: Decrease the output level.
Test
signal
sounds
sequencially
as
follows:
A:
Increase
the
output
level.
Front speaker (left) + Center speaker
1
Front
speaker
|
4
Stop
the
test
signal.

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English