Technics SA-GX910 User Manual

4 Start the
Headphones
(not
included)
sound
Plug type:
1/4 inch phone plug stereo type source.
1
2
3
POWER
1
STANDBY/ON:
nea corel
When the compact disc player and digital audio tape deck are
Set the power switch to ON. connected to ‘is unit iy usr ah oplleaitber Gaba (not
included), the digital indicator will illuminate by pressing
Select the “A” and/or “B” speaker system(s) the “DAT” or “CD” input selector.
to be used.
Digital indicator
Select the audio or video source. r
VCR 1: Press this button to watch video tapes from the VCR i
connected to the “VCR 1" terminals. DIGITAL
VCR 2: Press this button to watch video tapes from the VCR
connected to the “VCR 2” terminais.
VCR 3: Press this button to watch video tapes from the VCR
connected to the “VCR 3" terminals on the front
i
Note:
It is recommended that the power to the compact disc player
be switched OFF when it is not being used.
panel.
VDP: Press this button to watch video discs from the video
disc player connected to the "VDP" terminais. 4 Start the audio or video source.
TAPE MONITOR: Press this button to listen to tape. (Refer to the appropriate operating instructions for details).
No other sources selected by the input selector can be heard
while the tape indicator is illuminated. To listen to some other 5 Adjust the volume level.
source, press this button once again.
TUNER: Press this button to listen to radio broadcasts.
PHONO: Press this button to listen to phono discs.
DAT: Press this button to listen to digital audio tape.
CD: Press this button to listen to compact discs.
—18—

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English