Technics SA-GX910 User Manual

1 Connect the
VCRs.
3 Begin recording
and play back
the tape.
aS EES
Pa eines nie!
aS _—E—EEees
Edit recording from VCR 3 to VCR 1 and/or VCR 2 —
With a VCR connected to the “VCR 1” and/or “VCR 2” terminals
and a third VCR connected to the “VCR 3” terminal, edit-recording
of video tapes is possible from VCR 3 to VCR 1 and/or VCR 2.
‘1 Connect the VCRs. 2 Press the “VCR 3” button.
e "VCR 1” and/or “VCR 2" (The “{3]" will be displayed on the VCR display.)
TEFMINANS .sssecesseeenesenenel@ bE Used for recording
(See page 7.)
OVER 3” terminal ....... sce TO be Used for playback
(See below.)
VCR 3. VCR display
S-VIDEO IN VIDEO IN L_AUDIO IN_R
3 Begin recording on the VCR 1 and/or VCR 2
and play back the tape on the playback VCR
(VCR 3).
Follow your VCR's operating instructions.
This unit
(S-VIDEO) (VIDEO) c(t)
(S-VIDEO) (VIDEO) ay
S-OUTPUT VIDEO OUTPUT AUDIO OUTPUT
Playback VCR (not included)
—Ma—

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English