Technics SA-GX910

si
rena
Adjustment of tone control
1 Turn on the parametric EQ system.
1 P.EQ SYS
OFF/ON
catia FREQ/ LEVEL
TREBLE
©O
(The parametric EQ system off indicator goes out.)
Goes out
PEO TONE —
+0
Bee
40 83 100 60 BBD 400 690 tk LOK 20k 4k 83K OK 125K 1k Oe?
Press the parametric EQ/tone mode select but-
ton to select the tone mode.
(The tone mode indicator will illuminate.)
Tone mode
indicator
+0 49 —P.£0 TONE —
TONE MODE:
ng the Tone Control
3 Adjust the tone balance.
Adjust the low-frequency sound to the desired
level.
CENTER
FREQ/BASS
©
Adjust the high-frequency sound to the
desired level.
LEVEL/TREBLE
©
Note that these controls can be rotated beyond thelr positive
(+) or negative (~) extremes.
However, when either extreme is reached, the controls have
no effect.
Caution:
Extreme level adjustments in either frequency band may
cause damage to your receiver and/or speakers.