Technics SA-GX910 - Remote Control Section

: Front Panel Controls and Functions
e (continued)
Remote
control
section
$1] Function select keys
These
keys
are
used
to
select
the
component
to
be
controlled
by this remote-control transmitter.
92] Display OFFION key
This
key
is
used
to
switch
ON
or
OFF
the
display
of
this
remote-control transmitter.
\t
automatically
goes
“OFF”
when
the
display
is
not
used
for
approximately 18 minutes.
3] Audio power key
This key is used to switch ON or OFF the power of the
receiver.
Muting key
This key is used to temporarily reduce the volume level.
The volume level is attenuated by 20 dB (approx. 1/10).
Press once again to resume to the previous volume level.
—16—
995]
Operation
mode
select
keys
These
keys
are
used
to
select
the
operation
mode
to
be
operated by this remote-control transmitter.
USE:
Select
the
“USE”
key
to
set
this
remote-control
transmitter for normal operation.
LEARN
MODE:
Select
the
“LEARN
MODE”
key
to
set
this
remote-control
transmitter
to
the
"LEARN"
mode.
ENTER: Select the “ENTER” key to select the mode.
{See item [701],)
Input/function select keys
These
keys
are
used
to
select
the
input
source
at
the
compo-
nent
and
to
select
the
component
to
be
controlled
by
this
remote-control transmitter.
Operation keys
These
keys
are
used
to
select
the
desired
function
of
the
selected component.
Optional keys
These keys are used to memorize a code to be used
frequently. (See page 68.)
Volume keys
These keys are used to adjust the volume level.