Technics SA-GX910 User Manual

aus
STEREO
[i
MA
AA
A
wescan LT AN AN, aN ite
MEMORY oe,
[77] Fine mode indicator (FINE)
This indicator iltuminates when the fine mode select button is
selected in the parametric EQ mode.
Parametric EQ system center frequency
display
It displays the center frequency of the curves in the
parametric EQ mode arranged by the user with the parametric
EQ system or the curves pre-stored in this unit's memory.
Parametric EQ system operation select
indicators (MANUAL/FIXED)
One of these indicators will illuminate in accordance with the
fixed
preset
button
or
equalization
preset
buttons
setting.
[a0] Manual/tixed preset indicators
(123 FLAT)
It displays the type of curve selected with the equalization
preset buttons or fixed preset button in the parametric EQ
mode.
67] Parametric EQ system memory indicator (M)
This indicator illuminates when the parametric EQ system
memory button is pressed in the parametric EQ mode.
2] Parametric EQ system off indicator (OFF)
This indicator illuminates when the parametric EQ system is
off.
Tone mode indicator (TONE MODE)
This indicator illuminates when the parametric EQ/tone mode
select button is set to the tone mode.
—156—
63
100
160
250
400 630
1k
16k
25k
4k
63k
10k
125k
{6k
(Hz}
|
Mee
——PFEQ /TONE—~
4 (elaa] °P.EQ moot
SAMPLING
FREQUENCY
i?)
DOLBYSSTEREOIP RO - LOGI
CENTEROFF NORMALPHANTOM Ml TEST.
LOUDNESS
REAR
CENTE!
MuTING
Mivlll!
1
Mar
A
ie
(vcr J
088
Parametric EQ mode indicator (P.EQ MODE)
This indicator illuminates when the parametric EQ/tone mode
select button is set to the parametric EQ mode.
85]
Surround
mode
display
(SURROUND)
This
display
shows
the
surround
mode
selected
by
the
sur-
round
mode
select
button.
Delay time display (DELAY TIME)
This display shows the length of the delay time selected for the
surround feature.
87] VDP indicator (VDP)
This indicator illuminates when the input selector marked
“VDP" is pressed.
Dolby
3
stereo
indicator
(DOLBY
3
STEREO)
This
indicator
illuminates
when
the
Dolby
3
stereo
ON/OFF
button
is
switched
ON.
Dolby Pro-Logic Surround indicator
(D0) [Dot BY SuRROUND] PRO-LOGIC)
This indicator illuminates when the Dolby Pro-Logic Surround
mode is selected.
{90} Sampling frequency indicators
(SAMPLING FREQUENCY)
The appropriate indicator will illuminate whenever a digital
signal
with
one
of
the
sampling
frequencies
listed
below
is
detected at a “DIGITAL” terminal on the rear panel of this
unit.
$2 kHz: For digital signals with the sampling frequency of 32
kHz mode
44.1 kHz: CD and others
48 kHz: For digital signals with the sampling frequency of 48
kHz mode
Note: Some digital components (compact disc player, etc.)
emit digital signats whenever their power switches are
“on”.

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English