Technics SA-GX670

Automatic memory presetting
Set to the frequency from
which you want to start
automatic memory preset-
ting. (Follow steps 1 through 4 on
page 16.)
Press MEMORY until the fre-
quency begins to change.
(Automatic memory presetting will
start.)
To stop press MEMORY once again.
When a broadcast station is preset
The memory indicator and the preset channel number will be
displayed for approximately 1 second.
Illuminates
When presetting is completed
The last broadcast station to be preset will be displayed.
Correct presetting may not be possible in cases where the broad-
cast waves are too strong or too weak. In such cases, carry out
presetting manually.
Manual memory presetting
1] Set to the desired broad-
cast.
(Follow steps 1 through 4 on page 16
or 17 or steps 1 through 3 on page 18.)
You can also set the stereo mode to
the monaural position.
Itluminates
To cancel the memory function, press
MEMORY again.
Specify the desired channel
CleEhYe[ojto be preset using the
numeric button(s) (com-
pletes presetting).
(Example: Channel 12)
[1
(Within 2 sec.)
tox pete
speakers Sowa
@
RAUTO QUARTZ LOCK
MANUAL
LOCK
SPEAKERS STEREO
pi]
@ pM tho
To continue presetting
Repeat steps 1 through 3.
19