Technics SC-CH750 User Manual

1
(Also availble from the remote control)
1 Press POWER STANDBY © /ON to switch on
the power.
2 Adjust the volume level to about —60 dB.
3 Start the sound source.
CD: See page 30.
TUNER: See page 26.
Cassette deck: See page 37.
4
Note:
Before you set the system to the standby mode, be sure to reduce
the volume level to prevent the extremely high output from the tuner
amplifier from damaging the speakers.
How to adjust the left-right volume
balance
(Only from the remote control)
Press one of BALANCE (L or R).
Adjust the volume level as you like.
BALANCE
L R
Cc)
Pressing BALANCE buttons simultaneously will restore the ba-
lance to the center position.
Perform fine balance adjustment while playing the selected music
source. The balance display is only a rough quick.
2:4
Headphones
{not included)
How to mute the volume
(Only from the remote control)
Press MUTING on the remote control.
Li
MUTING indicator appears on the display.
Cancel the muted state by pressing the muting button once again or
reduce the volume level to the minimum position and then reset to
the desired volume.
How to use headphones
Reduce the volume level.
Connect the headphones to the headphones jack.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: Stereo mini

Technics SC-CH750 Specifications

General

Brand	Technics
Model	SC-CH750
Category	Stereo System
Language	English