Technics SC-CH750 User Manual

1
3
|
1.
2.
a
Adjusting the bass/treble sound
Press DOLBY PRO Loaic to select al an appro-
priate mode according to the types of en
setting you use.
(See page 61.)
Press BAND to select BASS or TREBL.
Each press of BAND advances the display as follows:
FLAT —>BASS
TREBL
BASS: Bass sound
TREBL: Treble sound
Equalization curve will appear in the Dolby Pro-Logic output
level display.
Turn JOG to adjust the level.
You can adjust the level within the range of +10 dB.
To adjust the delay time in succession
Press JOG MODE to select EFFECT mode.
The bar under EFFECT lights.
Adjust the delay time using JOG.
To cancel the level adjustment
Press BAND to select “FLAT”.
BAND
JOG MODE
Adjusting the delay time
(Also available from the remote control. For step 2, press one
of EFFECT to adjust the delay time.)
7
Press DOLBY PRO LOGIC to select an appro-
priate mode according to the types of speaker
setting you use.
(See page 61.)
Turn JOG to adjust the delay time.
You can adjust bass/treble sound in succession. If necessary,
proceed to step 2 left.

Technics SC-CH750 Specifications

General

Brand	Technics
Model	SC-CH750
Category	Stereo System
Language	English