Technics SC-CH750

Program play
(Only from the remote control)
This function allows you to program up to 20 tracks on a disc in any
order you choose.
—_ Press CD.
Press PROGRAM.
PROGRAM indicator will appear on the display.
12 3 4 6 "|
U
‘ a e s 0 Lo
W113 14 18
Press the numeric button to select the track
you want to play.
Total playing time of
Programmed the programmed
tracks
Programmed track
number
To select a track between 1 and 9:
Press the appropriate numeric button 1—9 directly.
To select a two-digit track:
First press 210 and then a numeric button 1-0.
For example:
Track no. 13:
Track no. 20:
Track no. 35: (210 }H{3]-{5]
Notes:
e@FULL appears on the track display when you try to program
more than 20 tracks.
@-~:-—— appears on the time display when the total play time of
the programmed tracks exceeds 99 minutes 59 seconds. In
this case, the display will not show the total time.
4 Repeat step 3 until you have completed the
- program.
5 Press the CD play button.
The program play will begin from the first track you pro-
grammed.
@ To clear a programmed track
1. Press CANCEL.
CANCEL indicator will light.
2. Press the numeric button of the track you want to cancel.
3. Press CANCEL.
CANCEL indicator will go off.
i To add the entry
You can add the entry in the play or stop mode.
Press the numeric button corresponding to the track to be added.
@ To cancel program play
Press PROGRAM.
PROGRAM
The compact disc player resumes sequential play mode.