Technics SC-CH750 User Manual

Using an External Unit
Listening to an external source
You can connect DAT, video cassette recorder, video disc player or
analog turntable to this system.
=C : ox
a—p— |=... =
Res eee
1 Press one of the input select buttons to select
the external source connected to this system.
DAT: Digital audio tape
VCR: Video cassette recorder
VOP: Video disc player
PHONO: Analog turntable
_The selected source will be displayed.
The display shows an example when you select VDP.
2 Start playing the external source which is
connected to the system.
See the instruction manual of the unit concerned for operating
instructions.
@ Recording from an external source
1. Press one of input select buttons to select the external source
connected to this system.
2. Press REC PAUSE to put the cassette deck into the recording
standby mode.
3. Press one of the playback buttons to start recording and start
playing the source to be recorded.
ae aes
@ To briefly interrupt recording
Press REC PAUSE.
eee ©
The cassette deck will go into the recording standby mode.
To resume recording, press the playback button corresponding to
the direction in which recording is taking place.
M@ To stop recording
Press the deck 2 stop/cassette holder open but-
ton on the cassette deck.
a/a
O
@ To record on a DAT tape or video tape
Start recording on a DAT or VCR, and then start playing the source
to be recorded.
You cannot record the sound with the equalizer curve or simulated
listening environment , and V.bass effect on a DAT or video tape.
To switch an external visual source (VCR, VDP)
from this system
1. Press the power switch of a TV connected to this system to ON.
2. Select “VIDEO” mode of a TV.
3. Press an input select button (VCR or VDP) connected to this
system.

Technics SC-CH750 Specifications

General

Brand	Technics
Model	SC-CH750
Category	Stereo System
Language	English