Technics SC-CH750 User Manual

Listening
to
Radio
Broadcasts
Manual tuner operation
[—=j— | eo =o
eC) os =C =
eee »)
Cc)
-
co
1 Press BAND to select FM or MW or LW.
Each time you press BAND, “FM”, “MW”, “LW” will be
displayed in order.
QUARTZLOCK t
STEREO — -— —-— — =
Lititldi
PM ce :
2 Press one of TUNING to tune in to the desired
broadcast.
The display will show the frequency in which you have tuned.
elf you have tuned in an FM stereo broadcast, the FM stereo
indicator will appear.
lf you can't receive the desired broadcast or can’t tune in the
desired frequency in the MW broadcast, you may need to
change the “allocation” setting. (See right.)
Bf If noise is excessive in the FM mode
(Only from the remote control)
Press FM MODE.
Lights
The sound will then be heard in monaural. If the broadcast signal is
weak, or if there is a large amount of interference, you will get a
clearer sound using FM MODE.
@ MW allocation settings
This unit comes equipped with an electronic digital tuner that di-
vides the broadcast band into many small steps. These steps match
the assignable broadcast frequencies and intervals in between.
Each country allocates (assigns) broadcast bands according to their
particular needs.
By adjusting the allocation, you can enable this tuner to receive MW
broadcasts allocated in 9 kHz steps.
1. Press BAND to select MW.
2.
Press
and
hold
BAND
for
approximately
3
seconds.
To
return
to
the
original
frequency
indication,
repeat
steps
1
to
2
above.

Technics SC-CH750 Specifications

General

Brand	Technics
Model	SC-CH750
Category	Stereo System
Language	English