Technics SC-CH750

Changing the Tone (continued)
(Also available from the remote control)
(SH-CH950)
While playing the desired source,
Press EQ to select the desired equalization curve.
Each press of EQ advances the equalization curve setting in the
following sequence.
HEAVY-~CLEAR—=SOFT
CAR
HP ST
You can record with desired equalization curves. To playback such
recordings, press ON/FLAT to select FLAT.
@ To cancel the equalization curves
(Also available from the remote contro!)
Press ON/FLAT to select FLAT.
ON/FLAT
FLAT display will appear.
@ About equalization curves preprogrammed to
this system (EQ)
[1] HEAVY
Use to add “punch” to rock and other music.
(SH-CH750)
[2] CLEAR
Use to clarify the treble range of jazz, etc.
[3] SOFT
Use to listen to background music, etc.
[4] HP ST (HEADPHONES STEREO)
Use to record a tape for playback using the stereo cassette player
(Headphones Stereo).
[5] CAR (CAR STEREO)
Use to record a tape for playback using the car audio system (Car
Stereo).