Technics SC-DV250 User Manual

Recording operations |
Ls}
B ROQTS948
i=)
Refer to illustration E¥ on page 27 of the illustrated booklet.
Preparation: Do the preparatory steps (= page 19)
1° Tune to the required station.
(= page 14, 15)
2 Press [@ REC PAUSE].
The
deck
goes
into
the
recording
standby
mode
and
the
play
indica-
tor
“<1"
or
“[>"
starts
flashing.
3
Press
[<I]
(reverse
side)
or
[[>]
(forward
side)
to
start
recording.
A
To stop recording
Press [Ml].
To temporarily stop recording
Press [(@ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press [<I] or [>] with the flashing indicator.
Refer to iNustration [J on page 27 of the illustrated booklet.
Preparation:
®Do preparatory steps 1 and 3 (= page 19).
insert the tape to be recorded in deck 1.
1° Set the tape direction on both decks.
@ Press [DECK 1/2] to select “DECK 2”.
@® First press [<]] or [>], and then [fi].
Repeat steps (1) and @) tor deck 1.
2 Press [TAPE EDIT] to start recording.
The indicator “<1” or “C>” shows deck 2 direction.
If either deck 1 or deck 2 stops, the other deck also stops.
SS
To stop recording
Press [i].
Both decks stop.
To enjoy another source while recording
Start playing the other source.
You can change the volume level and tone quality without affecting the
recording.
The
recording
level
and
the
noise
reduction
effect
of
the
original
(playback)
tape
will
be
recorded
on
the
new
tape.
Refer to illustration [4] on page 27 of the illustrated booklet.
This timer starts play of the selected source at the selected time.
The displays in the illustrations show settings for preset radio channel 1 to
play between 6:30 and 7:40 at —48 dB.
Preparation: Turn the unit on, set the time (+ page 7), preset radio sta-
tions if you want the timer to start playing the radio
(™ page 15).
1 @ Press [CLOCK/TIMER] to display “©PLAY” on
the tuner/amplifier.
Each time you press the button:
CLOCK »@PLAY-»@REC— Original display
—— Sih
@ Press [SET] within 3 seconds.
2 Follow these steps to set items @ to @.
@ Press [TUNING (v or «)] to select the condi-
tion required and
@ Press [SET].
@) Start time
® Finish time
© Source
TUNER <—»DVD<—>TAPE
tc ah
Insert a disc or tape if you select these sources.
If you select TUNER
Select a preset channel.
@ Volume
The play timer is now on standby. The display shows each condition
again then restores the original display.
3 Press [¢)/l] to turn the unit off.
®@PLAY/@REC indicator remains illuminated to show the play (or
record) timer is on.
The
timer
starts
at
the
set
time
with
the
volume
increasing
gradually
to
the
set
level.
ee
To cancel the timer
Press [OPLAY/OREC] so "@PLAY” goes out,
Each time you press the button:
©PLAY—@REC—©PLAY ©REC—Light off
4 dais , <4 es |
The play timer will be canceled, but the settings stay in the
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.

Technics SC-DV250 Specifications

General

Brand	Technics
Model	SC-DV250
Category	Stereo System
Language	English