Technics SC-DV250 User Manual

Refer to illustrations B§-[J on page 22 of the illustrated booklet.
There are two methods of presetting stations.
Automatic presetting: The stations the tuner can receive are preset.
Manual presettIng: = You can select the stations to preset and the order
they are preset in.
There are 39 channels available for presetting.
D Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at (= page 14).
Hold down [SET].
Release the button when “AUTO MEMORY” appears on the tuner/
amplifier.
The tuner presets all the stations it can receive into the channels in ascend-
ing order. FM stations are preset into channels 1 to 39, and AM stations are
preset into channels 21 to 39,
“SET OK" Is shown when presetting is complete and the last station to be
preset is played.
“ERROR' Is displayed if the tuner doesn't receive any stations. Do preset-
ting manually if this happens (see below).
AM stations replace any FM channels that were preset in channels 21
to 39,
E Manual presetting
Preset the stations one at a time.
@ Tune to the required station.
@® Press [SET].
@ Press [TUNING (v or a)] to select a channel.
@ Press [SET].
The station occupying a channel is erased if another station is preset in that
channel.
F Selecting channels
Preparation: Press [()] to turn the unit on.
Qn the remote control
Press [TUNER/BAND].
Press the numbered buttons to select the
channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press (210/-/--], then the two digits.
e.g. To select channel 21: [210/-/--]{2] [1]
3 Adjust the volume.
N=
On the main unit
@ Select “PRESET” with (TUNING MODE].
® Press [TUNING (v or a}] to selact the channel.
Refer to iilustration EJ on page 23 of the Illustrated booklet.
Boosting the super woofer adds power to the bass.
Press [DIGITAL S.WOOFER].
The indicator turns green.
The display on the tuner/amplifier changes each time you press the button:
MID (medium)—>MAX (high)—>cancel (off)
{a ee
There is only one lavel when listening through headphones.
To cancel
Press [DIGITAL S.WOOFER] to turn the indicator off.
ete
iat Maik wee
seca RRR a
sa eset Sa
Refer to Illustration [EJ on page 23 of the illustrated booklet.
Turning on the super sound equalizer gives you a more powerful sound,
Press [SUPER SOUND EQ].
The indicator turns green.
To cancel
Press [SUPER SOUND EQ] so the indicator turns orange.
rauemcnncaee
ee ta
Refer to illustration [J on page 23 of the Illustrated booklet.
Turn [MULTI JOG] to select a setting.
The display on the sound processor changes each time you turn the jog:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music
HALL: Expands sound to make you feel like you were in a hall.
Al-EQ: Adjust sound with the acoustic image equalizer (= page 16).
M.EQ: Create your own effects (™ page 16).
FLAT: Canceled (no effect is added).
On the remote control
Press [SHIFT]+ [EQ].
To cancel
Turn (MULTI JOG] to select “FLAT”.
Turn off the effect if sound quality reduces when using HALL with a source,
id field and quality ||
ging soun
Chan
RQT5S948
— wn

Technics SC-DV250 Specifications

General

Brand	Technics
Model	SC-DV250
Category	Stereo System
Language	English