Technics SC-DV250 User Manual

The record timer
Refer to Illustration EJ on page 28 of the lilustrated booklet.
This timer records the radio at the set time.
The displays in the illustrations show settings for recording preset chan-
nel 1 from 18:30 to 19:30.
Preparation: Turn the unit on, set the time (# page 7), preset radio sta-
tions (m page 15).
1 @ Press [CLOCK/TIMER] to display “OREC” on
the tuner/amplifier.
Each time you press the button:
CLOCK-»©PLAY—©OREC-— Original display
ie
@ Press [SET] within 3 seconds.
2 Follow these steps to set Items ©, © and ©.
@ Press [TUNING (v or «)] to select the condi-
tion required and
@ Press [SET].
@® Start time
® Finish time
© Preset channel
The record timer is now on standby, The display shows each condi-
tion again then restores the original display.
3 Prepare for recording.
@ Insert a tape into deck 2,
® Select the Dolby NR mode.
@ Select the reverse mode,
@ Select the tape direction.
4 Press [CA] to turn the unit off.
©PLAY/@REC indicator remains illuminated to show the record (or
play) timer is on.
Recording starts 30 seconds before the set time with the volume muted
during the set time,
To cancel the timer
Press [OPLAY/OREC] so “®REC” goes out.
Each time you press the button:
@PLAY—>@REC-> PLAY OREC-Light off
t J
The record timer will be canceled, but the settings stay in the
memory.
The play and record timers
Refer to illustration EJ on page 28 of the illustrated booklet.
Turning the timers on and off
The timers come on at the sat times if OPLAY/@REC indicator is on. They
can be turned on and off by pressing [OPLAY/@REC}.
Checking the timers
Press [CLOCK/TIMER] to select “®PLAY” (or “®AEC”).
The timer conditions are shown in the following order:
Play timer:
Start time Finish time—Source>Volume
Record timer:
Start time—Finish time Selected radio station
The timers can be checked even if the unit is off.
Playing the unlt after the timers are set
The unit can be used after the timers are set. Make sure the unit is off
before the set start time.
elf you turn the unit off and on again while a timer is functioning, the finish
time setting will not be activated.
‘elf the unit is on, the timer will not function. The system must be in the
standby modo.
This system retains the ON/OFF time settings until you make a new set-
ting. If you make a new ON time setting, you must make a new OFF time
satting,
@Do not turn DEMO on after setting a timer. The timers will not work while
DEMO is on.
Refer to Illustration [J on page 28 of the Illustrated booklet.
This timer turns the unit off after a set time,
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP 30 ——-+>SLEEP 60 -—>SLEEP 90
*_SLEEP OFF<—SLEEP 120<—!
a
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
“SLEEP” goes out,
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP],
The remaining time is shown for about 5 seconds,
To change the setting
Press (SLEEP] to display the remaining time, then press again to select the
required time.
Using the timers together
Any of the timers can be used together, but ensure the unit is off before the
start time for the record and play timers.
RaTS948
Ei Timer operations and convenient functions mi

Technics SC-DV250 Specifications

General

Brand	Technics
Model	SC-DV250
Category	Stereo System
Language	English