Technics SE-HDA710 - Page 2

Amplifier Section (Low frequency side)
Power output
DIN 100Hz, THD 1%, 4 both channels
driven:
2x12W
RMS 100Hz, THD 10%, 4 both channels
driven:
2x15W
Load impedance:
4
Amplifier Section (Mid Frequency side)
Power output
DIN 1kHz, THD 1%, 8 both channels
driven:
2x8W
RMS 1kHz, THD 10%, 8 both channels
driven:
2x10W
Total harmonic distortion
Half power at 1kHz 8 :
0.09%
Load impedance:
8
S/N: 81dB
S/N (2V Input, Rated power output): 100dB
Amplifier Section (High frequency side)
Power output
DIN 10kHz, THD 1%, 4 . both channels
driven:
2x4W
RMS 10kHz, THD 10%, 4 both channels
driven:
2x5W
Load impedance:
4
Headphones
Jack type: 3.5mm STEREO
Load impedance:
16-32
General
Power consumption 115W
STANDBY condition Normal:11W
Eco:0.9W
Power supply
[For (EG) area]: AC230V,50Hz
[For (EB) area]: AC230-240V,50Hz
Dimensions (WxHxD): 196x105.8x261mm
Weight: 3.6kg
Notes:
1.Design and specifications are subject to change without
notice.
2.Dimensions and weight are approximate.
3.Total harmonic distortion is measured by the digital
spectrum analyzer.
System/SC-HDA710:
Tuner:ST-HDA710, DVD Audio/Video Player: SL-HDA710,
Amplifier: SE-HDA710 , Cassette Deck: RS-HDA710, Speakers:
SB-HDA710 (Made in MAES.)