Technics SE-R1

15
English
Specifications

≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
∫ GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 250 W
Power consumption in standby mode Approx. 0.7 W
Power consumption in off mode Approx. 0.3 W
Dimensions (WkHkD) 480 mmk241 mmk567 mm
(18
7
/8qk9
15
/32qk22
11
/32q)
Mass (Weight) Approx. 54 kg
(119 lbs)
Operating temperature range 0 oC to r40 oC (r32 oF to r104 oF)
Operating humidity range 35 % to 80 % RH (no condensation)
∫ AMPLIFIER SECTION
FTC output power 150 W r 150 W (20 Hz to 20 kHz, T.H.D. 0.5 %, 8 ≠, 20 kHz LPF)
300 W r 300 W (20 Hz to 20 kHz, T.H.D. 0.5 %, 4 ≠, 20 kHz LPF)
Frequency response 1 Hz to 90 kHz (s3 dB, 8 ≠)
THD+N 0.05 % (1 kHz, 75 W, 8 ≠, 20 kHz LPF)
Input sensitivity/Input impedance
UNBALANCED 1.2 Vrms / 47 k≠ (ANALOG 0 dB)
BALANCED 1.2 Vrms / 47 k≠ (ANALOG 0 dB)
GAIN 29 dB (ANALOG 0 dB)
Load impedance
A or B, Bi-Wire 4 ≠ to 16 ≠
A+B 8 ≠ to 16 ≠
∫ TERMINALS SECTION
Analog input
UNBALANCED Pin jack
BALANCED 3 Pin XLR
Digital input Technics Digital Link
(15)
SE-R1-SQT0505_PP_mst.book 15 ページ ２０１５年１月２３日 金曜日 午前９時５１分