Need help?Do you have a question about the Technics SL-HD51 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Dynamic Range | 96dB |
| Channel Separation | 90dB |
| Output Level/Voltage | 2V RMS |
| Power Requirements | 230V, 50Hz |
Details on DA converter and pickup specifications.
Unit dimensions and weight specifications.
Procedures for handling optical pickup to prevent static damage.
Methods for grounding to prevent electrostatic discharge.
Step-by-step guide for playing CDs in sequence.
Starting playback via remote when system is off.
Procedures for checking main and CD servo P.C.B.s.
Procedures for replacing traverse deck and loading mechanism parts.
Method for powering the unit when operating it alone.
Using specific points as operation switches when unit is operated alone.
Procedure for checking output signals using oscilloscope or speaker.
Steps to display error codes for fault diagnosis.
Procedures for adjusting servo systems and displaying results.
Detailed schematic of the servo amplifier and related components.
Schematic of the loading motor drive and control circuit.
Schematic of the main control and signal processing circuits.
Schematic of the operation control and button input circuits.
Schematic of the power supply and regulation circuits.
Component layout for the CD servo printed circuit board.
Component layout for the loading motor printed circuit board.
Pinout and function details for the system control IC.
Pinout and function details for the servo amplifier IC.
Pinout and function details for the servo processor IC.
Pinout and function for motor drive control IC.
To Next Page
