Technics SL-MC400

Controls unit power and basic playback functions like play, stop, and pause.

Buttons for skipping discs, tracks, and performing searches.

Buttons for program, direct program, and disc group operations.

Numeric buttons and ID Scan for input and specialized operations.

Lists and illustrates the components included with the changer.

Illustrates how to connect the changer to a receiver or amplifier using audio cables.

Shows how to connect the changer to a household AC outlet.

Important considerations before, during, and after setting discs.

Detailed procedure for inserting discs into the changer slots.

Procedure for ejecting discs from the changer.

Method for tracking discs using a binder and slot numbers.

How the changer plays all tracks on all discs in order.

How to pause playback and resume it later.

How to completely stop playback and return discs to slots.

Procedure for selecting a specific disc via numeric input.

Procedure for selecting a specific track via numeric input.

Methods to exit the single disc play mode.

Steps to assign discs to one of five available groups.

How to view which discs are assigned to specific groups.

Initiates playback of a specific named group.

Stops playback of a selected group.

Removes specific discs from assigned groups.

Erases all programmed track selections.

Exits program mode and returns to sequential play.

Starts playback of a programmed sequence.

Plays tracks randomly from the current disc, then moves to another disc.

Plays tracks randomly from all discs, allowing track repetition.

How to stop random playback and return to normal play.

Explains repeat function for various play modes.

Repeats a single track or a programmed sequence.

Stops the repeat function.

Procedure for advancing or rewinding to different discs.

Procedure for advancing or rewinding to different tracks.

Guidelines for safely handling and cleaning compact discs.

Advice on storing discs to prevent damage and warping.

Steps to install batteries and important notes regarding battery care and usage.

Guidelines on how to effectively use the remote control with the changer.

Review and remove programmed selections using RECALL/CLEAR.

Use DIRECT to add tracks and start playback.

Navigate between discs and tracks using SKIP buttons.

Control repeat playback and single disc mode.

Assigning discs to groups and naming them using the remote.

Selecting playback mode for a chosen group.