Technics SL-MC6

Operations
4
4
y
SEARCH:CHARACTER
SKIPCURSOR
. §
b
;
ig eee neal
a (aon ae
;
: f
Oo vz
DISC ENTER
Pea ‘4
Pe ‘
Mh fd Ise x
Sequential play
The changer plays all the tracks on all the dises in order and stops
automatically when the last track on the last disc finishes playing.
Before starting, load your discs.
Press POWER.
The unit will switch on.
First, the message CHECKING DISCS will be displayed and
then the number of the disc previously played. If it was a CD-
TEXT disc then the name of the album will also be displayed
(= page 17.).
Steps 2 and 3 are not necessary if you want to begin play
from this disc.
Press DISC/CAPS.
Press.the numeric button(s) to select the
disc,
To select a disc numbered over 10:
For example: “11”
ij
For your reference
You can also select a disc with DISC SKIP (— or +) instead of
doing steps 2 and 3.
Press DISC ENTER.
Press >.
The changer plays all the loaded discs, from the selected
disc, all the way through to the disc before it.
Text information will be displayed in place of the time if itis a
CD-TEXT disc (mp page 17.).
To stop play
Press Mf.
The display showing the number of tracks and the total playing time
is cleared if the front panel is opened.
To temporarily stop play
Press 1.
To search for a position
Press and hold either <4 (backward) or ®P (forward) during
play. In program or random play modes, searching can only be
done on the current track,
To skip tracks
Press either id (backward) or Pi (forward) during play. In pro-
gram play, skipping goes in the programmed order.
You cannot skip backwards in random mode.
To skip discs
Press either - (backward) or + (forward) either while a disc is play-
ing or stopped.
This does not work during full disc random play mode or program
play.