Technics SL-PD647 User Manual

| SL-PD647
Hi ACCESSORIES 6 included)
YS
Power plug adaptor... 1 pc.
: : : (SJP5213-2)
[ RJA0019-2K (E, ae (SJUP2249-3) (SJP2257T) For (GC) area.
SJA173 (GN)
i CONNECTIONS
Before connecting the changer to your audio system, be sure that ©
the power of the changer and all other system components are
turned off.
Note:
The configuration of the AC outlet and AC power supply cord differs
) according to area.
Rear panel! of
this changer
(red) (white)
\
(white)
(L)
Household AC
(red) CG) outlet
- in Use a minus (—) screwdriver.
Connect the stereo connection cable (in @Note that this unit will be seriously damaged if.this setting is
cluded) to CD or AUX terminals of the ampli- not made correctly.
fier or the receiver. elf the power supply in your area is 117 V or 120 V, set to the
7
“127
V"
position.
\
[2]
To
operate with
the
remote
control,
connect
the remote controi cabie (included) to the RE- [4] Connect the power supply cord (included) to
MOTE CONTROL OUT terminal of Technics the household AC outlet or to AC OUTLET of
component. Technics component.
For (GC) area.
The operations such as play, stop, skip etc. can be If the power plug will not fit your socket, use the power plug
operated by remote control included with Technics re- adaptor (included). jie
ceiver
or
the
component
system.
For
details,
refer
to
ira
=
=
the operating instructions of the receiver or the system ——
to be used.
Insertion of Connector
For
(GC)
area.
Even
when
the
connector
is
per-
. . Connector
[3]
Set
the
voltage
selector
(VOLT
ADJ)
to
the
apace
n
oan
le
voltage
setting
for
the
area
in
which
the
unit
i
CORABELE
may
£A.
oltias
D>
will be used. shown in the drawing. Appi erat SS
However there is no problem us- Appliance inlet
ing the unit.

Technics SL-PD647 Specifications

General

Brand	Technics
Model	SL-PD647
Category	CD Player
Language	English