Technics SL-PD647

3L-PD647 |
Mm BEFORE MOVING
CAUTION:
Before moving this changer to another location, be sure that no
discs were left in the changer and that the power was not switched
to the standby condition while in the play mode.
Failure to do so will expose the compact discs and the aienber to
the risk of severe damage.
2G” 35 4
1 Press POWER to switch to the standby con-
dition.
Press POWER to switch on the power.
Press OPEN/CLOSE to open the loading
drawer.
Press DISC SKIP to. rotate the disc. trays and
remove the discs from all disc trays.
Press OPEN/CLOSE to close the loading
drawer.
Oo oa F&F WN
Press POWER to switch to the standby con-
dition.
If you have pressed a wrong button by mistake, return to step 1.
The optical pickup will be automatically released when using the
changer again.