Technics sl-pd887

Technics
How to use the remote
control transmitter
RA K-SL404 WH
Insert the batteries included with this unit as shown below.
When you need to replace these batteries
Use two UM-4 '‘AAA”, lEC R03 (1.5 V) or equivalent batteries.
Method for use
Use the remote control within 60 degrees and within 7 meters (23
ft.) facing directly toward the changer’s remote control signal sen-
frora
Be sure the transmission window and the unit’s sensor are free
from dust. Excessive dust might affect performance.
The operation may not be correct if direct sunlight or another
strong light source strikes the receiving sensor of this unit. If
there is a problem, place the unit away from the light source.
[T] iMi m] m
RQT2788-P