Technics SL-PS700 User Manual

V LEVEL b
CICo
Output level control function
(by the remote control transmitter only)
The output level control function enables the unit to contro! the
output level from 0 dB to ~12 dB by 2 dB step.
™@ To drop the output level, press ean button.
Level indicator
The dropped level
@ To raise the output level, press eee button.
eThe level display returns to the original state after about 2
seconds.
The unit is designed so that the output level cannot be adjusted in
the edit mode to avoid changing the recording level.
When the power is switched to STANDBY (}) and then switched
back on again, the level returns to 0 dB.
-~15—
Operations can also be controlled at the main unit. (Refer to page
16.)
The auto cue function allows the unit to wait in the standby
condition at the beginning of each track so as to start play right
when you are ready.
When each track finishes playing, the unit skips to the beginning of
the next track and switches to the play standby mode. This function
is especially convenient when used together with programmed
play.
1 Press the auto cue button.
2 Press the play button.
The unit switches to the play standby mode.
¢Pause indicator illuminates and play indicator flashes on and off.
Auto cue indicator
{ |
OG |
brancx INDEX MIN,
3 Press the play button again to start play.
Pressing the auto cue button again cancels auto cue.
Note:
The auto cue function may not function at the beginning of track
properly if a selection begins with a very soft passage or if there is a
lot of background noise.

Technics SL-PS700 Specifications

General

Brand	Technics
Model	SL-PS700
Category	CD Player
Language	English