To Next PageTo Next Page
Need help?Do you have a question about the Technics SL-PS840 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Output Level | 2.0 V |
| Disc format | CD, CD-R, CD-RW |
| Digital outputs | Coaxial, Optical |
| Digital Output | Yes |
| Channels | 2 |
Instructions on how to replace the fuse in the power plug.
Guidelines for unit placement, ventilation, and avoiding moisture.
Lists the items included with the product for initial setup and use.
Instructions for correctly installing and using batteries in the remote control unit.
Important operational tips for using the remote control effectively.
Identifies and explains the function of the main controls on the front panel.
Step-by-step guide to playing a disc sequentially from start to finish.
Instructions for connecting and using headphones with the unit.
Instructions on how to select tracks using the remote control keypad.
Instructions on how to select tracks directly from the player's front panel.
How to stop or exit the random playback mode.
Step-by-step guide to selecting and sequencing tracks for programmed playback.
How to search for specific sections on the disc using the remote control.
How to search for specific sections on the disc using the main unit controls.
How to move forward or backward between tracks on the disc.
How to use the index skip feature to navigate within tracks.
How to make the unit repeat the currently playing track or the entire disc.
How to set start and end points for repeating a specific section of a track.
How to start playback with gradually increasing volume.
How to end playback with gradually decreasing volume.
Steps to prepare for sequential recording and set tape length.
Detailed steps for preparing the cassette deck, including system settings and indicators.
How to initiate recording when the cassette deck lacks a SYNCHRO EDIT terminal.
Guidelines for safely handling, removing, and storing compact discs.
Procedures for unit cleaning and detailed technical specifications.
