Technics SL-PS700 User Manual

[Example] Set and operate as follows (£
denotes the initial setting.)
Editing desired tracks only (manual)
Desired tracks can be programmed one by one while monitoring
the time remaining on the tape.
1
2
Prepare for recording on the cassette deck.
(Refer to page 18.)
Press the [F1] button to select the tape length.
(Refer to step 2 on page 18 for details.)
The automatic editing functions and the tracks are pro-
grammed: on the both tape sides A and B.
Then you can perform the clearing, recalling or adding to the
programmed tracks as well as in the program play mode.
Press the clear button until 0” appears in the
track number display.
Enter the desired track numbers for side A
using the numeric buttons.
For example, if you press CI ‘cy oO:
Number of tracks Remaining time
to be recorded
pee ee
SWEA 4 213 45678
Bars for tracks reserved for side A illuminate
elf the tape is not long enough, a minus sign (—) appears in front of
the remaining time and “OVER” is indicated on the display. Press
the clear button and make the selection again.
—19—
5
6
Press the [F3] button and switch over to the
side B display.
Proceed with steps 3 and 4.
eAdjust the recording level. (Refer to page 20.)
Press the play button.
Recording will begin from side A.
eWhen you want to record programmed tracks, first program
tracks in memory using the program play procedure (refer to page
12). Then press the button.

Technics SL-PS700 Specifications

General

Brand	Technics
Model	SL-PS700
Category	CD Player
Language	English