Technics SL-PS700

[Example] Set and operate as follows (
] denotes the initial setting.)
ENGLISH
Allotting tracks to the tape without
wasting tape space (just time)
The
sequence
of
the
tracks
is
automatically
re-arranged
so
that
the
unrecorded
sections
at
the
ends
of
the
tape
are
made
as
short
as
possible.
1
2
Prepare for recording on the cassette deck.
(Refer to page 18.)
Press
[F1]
button
to
select
the
tape
length.
(Refer
to
step
2 on
page
18
for
details.)
Press [F2] button.
The unit begins calculating the best order of tracks on the disc
which
will
leave
the
least
possible
amount
of
blank
space
on
the cassette tape.
(The
time
to
be
spent
on
the
calculation
is
20
seconds
at
maximum.)
Number of tracks which can be
recorded Remaining time on side A
4
eAdjust the recording level. (Refer to page 20.)
Press the play button.
Recording will begin from side A.
Oi [okTinte mele tal-mt:lel-wclale MU lalacvevelae[=te|
sections (fade end)
This function allows you to add a desired track on the remaining
time on each side of the tape with the fade-out performed at the
end of the tape.
i! Prepare for recording on the cassette deck.
(Refer to page 18.)
2 Press [Fi] button to select the tape length.
(Refer to step 2 on page 18 for details.)
8 Enter the additional track to be recorded on
the remaining time on side A by pressing the
numeric buttons.
For example, if you add track 3:
Minus indication
nN
sui 4a 3:06 awe
sec LI
SEAT ZS TS C7 B 9 101112
4. Press button.
The time fade indicator lights.
elf you want to add a track on the remaining time on side B,
press button and repeat steps 3 and 4.
eAdjust the recording level. (Refer to page 20.)
5 Press the play button.
Recording begins from side A.
The fade-out begins 5 seconds before the end of the tape side
A.
—21-