Technics SL-XP505 User Manual

15 i P rogrgm pl3y ^ disc in 3 c©rt3in order)
A maximum of 24 selections can be programed. First, set the play mode selector to “NOR
MAL” position. (The Play Mode Indicator has no display.)
BeforG USG, tgIgssg thG hold and th© lock statG of th© unit.
For example, to play track 3, track 5,
track 1 in that order...
1 . P ress the ► N Button 3 times in the stop
mode.
2. P ress the Memory/Recall Button.
■ — I I — ■
3 - - n iM
- 1 -—
Track Number Memory
Program Order Indicator
•If the Memory/Recall Button is pressed
repeatedly, the same track is pro¬
gramed.
3. R epeat procedure 1 and 2 according to
your program selections.
O Press the ► N Button twice.
@ Press the Memory/Recall Button.
O Press the Memory/Recall Button.
•If the program time is over 24 times,
the following display appears.
Full Mark
4. P ress the Play/Pause Button.
•The disc will be played in the pro¬
gramed order.
•When all programed tracks have been
played, the disc will automatically stop.
•To confirm the contents of the program,
press the Memory/Recall Button during
play.
♦
restored initial display
•To clear the program, press the Stop/
Operation Off Button.

Technics SL-XP505 Specifications

Power

power supply	DC 4.5 V
power consumption (AC adaptor)	3 W
power consumption (battery)	0.8 W (DC 3 V)

Audio Specifications

frequency response	20-20000 Hz
dynamic range	more than 94 dB
output voltage	1.0 V (50 kO)

Weight and Dimensions

dimensions	128x29.7x148 mm
weight	345 g with batteries