Technics ST-GT350 - Cabinet Parts Location

BAND
Press BAND to select “FM”
or “AM”.
Set to the desired broad¬
cast.
(Follow steps 3 and 4 on page 8.)
You can also
the monaural
9)
set the stereo mode to
positon. (Refer to page
Specify the preset channel
using the numeric button(s).
To designate channels 1-g :
Press the appropriate ( 1 - 9 ) preset-
tuning button.
To designate channels 10—30:
(Example: Channel 20)
(within 10 sec.)
(within 10 sec.)
Press MEMORY momentari¬
ly.
To cancel the memory function, press
MEMORY again.
u