Technics ST-GT350 Operating Instructions

By presetting the desired broadcast stations into the memory
channels of this unit, broadcast stations can be selected simply
by pressing preset tuning button(s). (Refer to page 11 for tuning.)
Automatic memory presetting
-Before presetting ----—
How many broadcast stations can be preset?
A total of 30 FM and AM stations can be preset.
How is presetting done?
The two following methods are available.
•Automatic memory presetting
Automatic memory presetting allows this unit to automatical-
| ly search for broadcast stations and then preset them into
memory.
With this function, searching proceeds from the frequency
currently being displayed and continues to highest frequen¬
cy, and broadcast stations are preset in the order in which
they are located.
In this method, the channel ranges that can be preset into
the memory for different bands (FM or AM) are set as
follows.
Channel
1 2 20
21 30
4-- -Cl
L- AM
Mfvl.——- ■ +
rm--
For example, after presetting the FM band, if the AM band is
preset, the previous presettings In the sections in the above
illustration which overlap will be erased and the subsequent
settings will be preset. Therefore, the FM band stations will
be kept for channels 1 -20 and the AM band stations will be
preset to channels 21 -30.
• Manual memory presetting
The desired broadcast stations can be preset into the
desired channels by the user.
This can also be used as a method for changing selected
broadcast stations that were preset in “Automatic memory
presetting”.
Please remember this:
If a new broadcast station is preset into a channel, the setting
for the broadcast station which was previously entered in that
channel will be automatically erased.
Press BAND to select “FM”
or “AM”.
Set to the frequency from
which you want to start
automatic memory preset.
ting. (Follow steps 3 and 4 on page
8 . )
Press and hold MEMORY un¬
til the frequency begins to
change.
(Automatic memory presetting wiil
start.)
To stop press MEMORY once again.
When a broadcast station is preset
The preset frequency and the preset channel number will be
displayed for approximately 1 second.
\\s
STEREO __
u u
U Q
i r//iN
f LJ MHz
CH
QUARTZ LOCK
/ AUTO-*
! MANUAL
/ LOCK
Illuminates
vviboii pioseiting is cumpieiea
The last broadcast station to be preset will be displayed.
Correct presetting may not be possible in cases where the broad*
cast waves are too strong or too weak. In such cases, carry out
presetting manually.

Technics ST-GT350 Specifications

General

Brand	Technics
Model	ST-GT350
Category	Tuner
Language	English