Technics ST-GT350 Operating Instructions

To lock a broadcast station being
received
To cheeky the FM signal strength
TUNING MODE
tuningwide p ress TUNING MODE to select
“LOCK”.
(Refer to step 3 on page 8.)
STEREO GH QUARTZ LOCK
/—/ /_/ / I I AUTO
1 ™ UU.
During this mode, the frequency will not
change if the TUNING control is turned.
[While receiving an FM broadcast signal...]
Press and hold FM until the
display changes to show the FM
signal strength.
The signal strength will be displayed in 2-dB
increments. I
c n j o
-I u o o
CH QUARTZ LOCK
AUTO-*
MANUAL
LOCK
To return to the frequency display, press the
button once again.
If noise Is excessive in the FM
stereo mode
For your reference:
I* 16 . ^ sp l?y ^ ll au,omat ' c a l | y change back to show the frequen¬
cy if the TUNING control is turned so that the frequency changes.
Press FM momentarily.
(The MONO indicator will illuminate and the
mode will change to monaural.)
Illuminates
Q O i n J*"
QUARTZ LOCK
WTOM
FM
u u.
/ U MHz
MANUAL
LOCK
Although the stereo effect will be lost, the
noise Interference will be reduced, making it
easier to listen to the broadcast signal.
To cancel the monaural mode, press the but¬
ton once again.
For your reference:
► This unit is normally in the auto mode, and it automatically
distinguishes between stereo and monaural broadcast signals
•The mode will automatically change back to auto if the TUNING
control is turned so that the frequency changes

Technics ST-GT350 Specifications

General

Brand	Technics
Model	ST-GT350
Category	Tuner
Language	English