Technics SX-G5 - Page 31

Programming The Jazz Waltz anccrene
Remember that, since this is a three-beat pattern, only keysO
through 11 will be used. Notice also that this is a two-measure
example.
1. Press Record and eithe Composer I, Il or Ill.
2. Press Clear key.
3. Press Triplet and then Beat keys since the example 7. Press bass drum button and lower manual key 0.
contains three-beat triplets in the hi-hat cymbals.
8. Press snare drum button and lower keys 3 and 8.
4. Press open hi-hat button.
For the second measure of the example...
5. Press lower manual keys 0 and 8.
9. Hold down the white 2nd Bar key and enter the snare
6.
Press
closed
hi-hat
and
lower
keys
4
and
7.
Hi-hat
cymbal
drum
on
the
lower
manual
key
4.
part for first measure is complete.
10. Press Record — programming is complete.
Press the Composer button again and start the rhythm to
hear your two-measure jazz waltz pattern.
Modifying Programmed Rhythms
At any time, you can change any voice in any rhythm pattern 4. Press Clear key to erase existing pattern for that
you've programmed. All you do is: instrument.
1. Press Record. 5. Enter new pattern.
2. If necessary, press Triplet or Beat. 6. Press Record and the Composer button.
3. Press button indicating voice you wish to change.
o Store Rhythms Other Than Four-Beat Rhythms
Three-beat Rhythms Five-beat Rhythms (a three-beat measure + two-beat
1.
Press
the
record
button.
measure
pattern)
2.
Select
either
Composer
I,
II,
or
Ill.
1.
Press
the
record
button.
3.
Press
the
clear
key.
2.
Select
Composer
I,
Il
of
HI.
4.
Press
the
beat
key.
3.
Press
the
clear
key.
5, Store the rhythm pattern for each instrument. 4, Press the beat key. With the beat and 2nd bar keys held
eln the preset mode, the first three beats are stored. down, press the 2 key on the lower keyboard.
In the manual mode, the white keys 0 through 11 are used 5. Store the two-measure pattern for each instrument.
to store the rhythm. 6. Press the record button.
e Similarly, to program seven-beat rhythms, store the two-
6. Press the record button. measure pattern of the four- and three-beat rhythms.
Two-beat Rhythms
Instead of step 4 in the above procedure, press the 2 key on
the lower keyboard with the beat key held down. Then store
the 2-beat rhythm patterns.
eln the preset mode, the first two beats are stored.
eIn the manual mode, the white keys 0 through 7 are used.
29