Technics SX-KN2400

Part V Composer
114
QQTG0692
Composer
MEASURE DELETE
Delete specified measures from all parts at once.
• The length of the performance accordingly
decreases by the number of deleted mea-
sures.
1.
Use the FIRST MEASURE
∧
and
∨
buttons, to
specify the first measure to delete.
2.
Use the LAST MEASURE
∧
and
∨
buttons to
specify the last measure to delete.
• One measure is the smallest unit that can be
deleted.
3.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• When the INTRO or ENDING measures are
deleted, the Maj and Min data are erased at
the same time.
MEASURE INSERT
Insert blank measures at a specified point.
• The length of the performance accordingly
increases by the number of inserted mea-
sures.
1.
Use the FIRST MEASURE button to select the
point (measure) where the measures are to be
inserted.
2.
Use the NUMBER OF MEASURE button to
select the number of blank measures to insert.
• No more than 16 measures total can be
inserted.
3.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• The Maj or Min data is inserted in the INTRO
and ENDING at the same time.
10_Part V.fm 114 ページ ２００３年１月２７日 月曜日 午後１時４５分